Energy Introductions — exclusive homeowner introductions for installers
Solar — owner-occupier

Solar leads for UK installers

Homeowners who researched what solar costs and what support exists, established that they will be paying for it, and asked to be introduced to an MCS installer. No benefits-status noise in this feed.
Indicative 8-10 a week
~130 a week wider interest stream
MCS certification required
The feed

Where our solar leads come from

Owner-occupiers who have read what solar costs, understand that zero per cent VAT on energy-saving materials ends on 31 March 2027, and asked for an installer. The wider solar interest stream runs at around 130 a week; the able-to-pay slice is the part we release.
Apply for a feed
  • Tenure confirmed as owner-occupier
  • Property type, which drives roof suitability and scaffolding
  • EPC band where the homeowner knows it
  • Work wanted, separating panels only from panels plus battery
Who it is for
MCS-certified solar installers who want owner-occupiers rather than tenants and benefits-route enquiries.
What you get
A clean able-to-pay queue you can quote without first screening out people waiting for a scheme.
Energy Introductions — exclusive homeowner introductions for installers
8-10
Indicative able-to-pay enquiries a week. Not guaranteed.

How our solar leads are qualified

Solar is the feed where a wrong record costs the most, because a survey is expensive. Tenure, property type and the work wanted are all captured inside the homeowner's own enquiry.
Apply for a feed
  • Tenure, so tenants and landlords are separated from owner-occupiers
  • Postcode, for travel time and grid considerations
  • Benefits status, used to keep the able-to-pay slice clean
  • Timestamp, landing page and referring source
Who it is for
Installers who want their surveyors on roofs that can actually be quoted.
What you get
Higher survey-to-quote conversion, because the tenure and payment questions are already answered.
Energy Introductions — exclusive homeowner introductions for installers
9 fields
Captured on every record, including consent evidence.

Exclusive vs shared solar leads

Solar introductions go to one MCS installer under a signed data-sharing agreement. They are not released to a second partner at any point.
Apply for a feed
  • One introduction, one partner, for good
  • Signed data-sharing agreement before the first release
  • MCS certification and ICO registration verified first
  • Dead, disconnected or wrong numbers replaced within ten working days
Who it is for
Installers competing against three other quotes on every shared solar enquiry they buy.
What you get
You are the only installer the homeowner was introduced to.
Energy Introductions — exclusive homeowner introductions for installers
1 : 1
One introduction, one partner. Never resold.
FAQ
Is this the whole solar stream or a slice of it?
A slice. Around 130 homeowners a week show solar interest on our consumer platform. The able-to-pay owner-occupier slice — the part worth an installer's survey slot — runs at an indicative 8-10 a week, and that is what we release.
Are you selling personal data?
No. The homeowner asks to be introduced to an installer and ticks a specific box to that effect. You receive the introduction they asked for, together with the evidence of them asking for it. We fulfil the homeowner's own request; we do not run a marketplace.
Where do the enquiries come from?
Organic search to our consumer grants platform. No paid ads, no social lead forms, no prize draws or incentives, no co-registration and nothing bought in. You can see the landing page and referring source on every introduction.
How much volume is in this feed?
An indicative 8-10 able-to-pay enquiries a week, from a wider interest stream of around 130 a week. Both figures are indicative and are not guaranteed.
What does it cost?
Rates are on application. Per-introduction and per-install structures both exist and are discussed on a call once we know your feeds, coverage area and weekly appetite.
What consent evidence arrives with each introduction?
The version of the consent wording the homeowner agreed to, the timestamp they agreed at, the page they were on, and the specific purposes they consented to, including the separate tick asking to be introduced to an installer.
Who is allowed to receive introductions?
ICO-registered companies holding the accreditation the feed requires, who have signed our data-sharing agreement. We verify accreditation before anything is released.
Can I pass an introduction on to another company?
No. The agreement prohibits resale, syndication and onward sharing. The homeowner asked for one installer, so the introduction stays with one installer.
What is the replacement policy?
If a number is dead, disconnected or wrong, tell us within ten working days and we replace the introduction. We do not replace introductions because the homeowner chose another quote or changed their mind.
Are you affiliated with any government scheme?
No. We are an independent guide to UK energy grants and an installer-partner network. Scheme names are used descriptively so installers know which rules a record was qualified against.
How do I apply?
Complete the application form with your company details, accreditations, coverage area and the feeds you want. Every application is read by a person, not scored by a form.
How long does onboarding take?
We aim to come back within one working day. Once accreditation is verified and the data-sharing agreement is signed, your first weekly release follows.
Which accreditations do you check?
It depends on the feed: MCS and Boiler Upgrade Scheme registration for heat pumps, Gas Safe for boilers, PAS 2030 or TrustMark for funded retrofit, MCS for solar, and NICEIC or NAPIT for EV charge points.
Can I take more than one feed?
Yes. Most partners take two or three. Tell us which on the application and we will confirm what is open in your coverage area.
Can I set a weekly cap?
Yes. Volume is agreed up front and released on a weekly cycle, so it matches the capacity you actually have rather than arriving in bursts.
Apply
Energy Introductions — exclusive homeowner introductions for installers

Take a feed that is 
yours alone

Tell us your coverage area and accreditations. If there is a fit we will send the data-sharing agreement and schedule your first weekly release.
Apply for a feed